What to do if BitLocker fails to encrypt the drive

Madalina has been a Windows fan ever since she got her easily on her first Windows XP computer. She is interested in all things technology, especially emerging technologies -- AI and DNA computing in... Read more than

  • BitLocker sometimes fails to encrypt deejay drives, displaying several mistake messages.
  • Usually, this problem appears when the users are upgrading their OS to a newer version.
  • Cleaning the disk and re-creating the division will well-nigh likely solve the consequence correct away.
  • A practiced solution is also to enable BitLocker without a compatible Trusted Platform Module.

What to do if BitLocker fails to encrypt the drive

XINSTALL BY CLICKING THE DOWNLOAD FILE

BitLocker is a Windows 10 built-in tool that you can activate on your Os to protect your hard drives or removable drives from offline attacks.

While this is a most welcome software offered past Microsoft for privacy purposes, the tool has its glitches.

For instance, users complained well-nigh protected drives that were unusable when migrating from an older OS version to a newer one.

Other common BitLocker reported error letters are:

  • This device can't employ a Trust Platform Module
  • Illegal operation attempted on a registry key that has been marked for deletion
  • BitLocker Drive Encryption cannot be used because critical BitLocker files are missing or corrupted; use Windows Startup Repair to restore the file to your computer (0x8031004A)
  • The BitLocker encryption central could not exist obtained from the Trusted Platform Module (TPM) and enhanced Pin; endeavor using a Pin containing simply numerals. C: was non encrypted
  • BitLocker could not be enabled; the data bulldoze is not set to automatically unlock on the current calculator and cannot be unlocked automatically. C: was not encrypted
  • The drive cannot be encrypted considering it contains organisation boot information

For each of these errors, y'all'll find a solution in this article. Hopefully, by the finish of this material, you'll be able to use BitLocker to the all-time of your needs.

How can I set BitLocker drive encryption issues?

  1. Clean the disk and re-create the partition
  2. Change the Security Scrap settings
  3. Enable BitLocker without a uniform TPM
  4. Articulate the TPM (Trusted Platform Module)
  5. Modify the settings of USB devices in BIOS

1. Clean the disk and re-create the partition

ane.1 Clear the partition with a third-party software

Before nosotros go on, keep in listen that this method will erase all the information stored on your deejay.

It'southward advisable to create a backup on a dissimilar drive just to make certain that you won't lose all your files and folders.

For less hassle, you could assign this task to a 3rd-party dedicated tool that volition surely do the right matter. On this note, we recommend the excellent tool beneath.

Information technology is a multifunctional banana, that will manage, division, and optimize your hard bulldoze according to your needs.

If you have a backup, equally mentioned, run this software to divide, motility, resize and manage your partitions, without data loss, to make the virtually of your disk space.

In this instance, you'll want to utilize the Format Partition characteristic, to fresh-clean the deejay, so that yous can move the saved data dorsum in the blank space.

⇒ Go AOMEI Sectionalisation Assistant

Skillful Tip: Some PC issues are hard to tackle, especially when information technology comes to corrupted repositories or missing Windows files. If you lot are having troubles fixing an error, your system may be partially broken. Nosotros recommend installing Restoro, a tool that will scan your car and place what the error is.
Click here to download and start repairing.

one.2 Clear the partition manually

  1. Blazon cmd in the Windows search tab and click on Run every bit administrator to launch Command Prompt as an administrator.
  2. Type diskpart, and hit Enter.diskpart
  3. Enter list diskto show a list of all drives.list disk
  4. Enter select disk #  (where # is the problematic bulldoze) and hit Enter.
  5. Typemake clean and striking Enter.
  6. Wait until the drive is cleaned. At present, information technology'due south time to create a new partition.
  7. Type create partition principal and hit Enter
  8. Typeassign letter = # (Again, # is the alphabetic character you want to use).
  9. Format your partition by typingformat fs=ntfs quick and hit Enter.

The manual process can be catchy so proceed with extreme care and follow it to the letter of the alphabet. If y'all're not experienced, you lot should go with the software recommended above.

2. Modify the Security Chip settings

  1. Start your machine and open the BIOS setup.
  2. Go to the Security tab and select Security Scrap settings.
  3. Select the Discrete TPM pick.
  4. Go to Articulate Security Flake and relieve your changes.
  5. Restart your machine, log in, and enter your Pin. Cheque if the issue persists.

According to reports, information technology seems this effect affects machines equipped with Intel PTT Security Fries using particular settings.

Namely, when the issue occurred, the BitLocker Bulldoze Encryption used TPM and Pivot, and the Permit BitLocker without a compatible TPM option was turned off.

Too, the machines were running the Bone in BIOS, non UEFI. We listed the general steps to follow above. Keep in mind that they may vary on your machine.

If you want to opposite the action, you need to replace the firmware's boot capability with UEFI boot. Sometimes, yous may also need to reinstall the OS.

In example you cannot go far at a set, we strongly recommend yous to switch to using the software below, which is a powerful encryption tool.

Its wide range of security features includes copying encrypted lockers to the USB drive, CDs, DVDs, and even email attachments, as well as the possibility to upload your encrypted files to a deject server.

⇒ Get Binder Lock

3. Enable BitLocker without a compatible TPM

  1. Open up Run from Start push button, write gpedit.msc, and striking OK.
  2. Information technology will open the Local Group Policy Editor.
  3. Click on Administrative Templates from Calculator Configuration and and so on Windows Components.
  4. Select BitLocker Drive.
  5. Go to Encryption and and then to Operating Arrangement Drives. bitlocker operating system drives
  6. Double-click on Require boosted hallmark at startup. bitlocker Require additional authentication startup
  7. In the new window, select Enabled and Allow BitLocker without a uniform TPM (requires a password or a startup central on a USB flash bulldoze).bitlocker Require additional authentication startup
  8. Save the changes by hitting Apply.
  9. Now try to encrypt your drive past using BitLocker.

Enabling BitLocker from the Group Policy Editor without TPE tin solve this trouble speedily so make certain you try information technology by using the steps above.

4. Clear the TPM (Trusted Platform Module)

  1. Open Run from Kickoff button, write tpm.msc, and press Enter.load management console windows 10
  2. A new direction panel volition open.
  3. Nether the Action tab, on the correct, press Articulate TPM.TPM trusted Platform Module
  4. In the Clear TPM Security Hardware box, the simplest solution is to check I don't have the owner password and click OK.
  5. You will be asked to reboot. Information technology will indicate that y'all should press a key (usually F10) in society to clear the TPM.
  6. Once the system reboots, y'all will be prompted to press a primal (unremarkably F10) to enable TPM. Printing that fundamental.
  7. The TPM Setup wizard will start for you lot to enter a TPM owner countersign.enter TPM owner password

<!– wp:windowsreport-companion/editorial-note-block {"text":"Note: Before starting to articulate TPM settings, please make sure that y'all backed upwardly your reckoner, as mentioned in the first solution. This method may result in data loss.","icon":"/wp-content/themes/windowsreport/avails/images/svg/note-pencil.svg"} /–>

v. Change the settings of USB devices in BIOS

  1. Enter the BIOS setup utility (Consult the manual from the manufacturer to learn how to practice that for your specific model).
  2. Go to Advanced, and so Peripheral Configuration.
  3. Access USB Host Controller and USB Devices.
  4. The setting of the USB Devices should be All.USB Host controller BIOS

This solution applies when BitLocker fails to encrypt the operating system drive using a USB startup key. The crusade of it can exist related to some settings in BIOS mode.

BitLocker usually does a great job encrypting your information, but after that, don't forget to safeguard them with 1 of the best automated fill-in software for Windows 10.

We hope that these solutions helped you to fix your BitLocker encryption problems. If y'all've got additional tips and suggestions, feel free to list them in the comments section below.

Ofttimes Asked Questions

  • You lot volition need to check the recovery passwords. If you can't manage to practice that, we have a step-by-stride guide to fix the BitLocker failed to unlock upshot.

  • You lot can only practise that past formatting the bulldoze. But if you don't want it to encrypt your bulldoze y'all can also disable it in Windows ten.